Entering An Address For Route Guidance From The List; Displaying The Location Of A Destination; Editing The Address Of A Destination; Adding Destinations - Porsche PCM3.1 Operating Manual

Inserting an address from a list
5. Select " Previous destinations Stored desti-
" or "
nations ".
6. Select the address you want in the list.
The address is accepted.
 It is not possible to store a tour, a trace or a
landmark list as a personal destination.
Adding an address from a POI search
POI
5. Select " ".
For the rest of the procedure, please refer to
the section "Points of interest" on page 151.
Entering an address for route guidance
from the list
1. Press the f button.
2. Select " Stored destinations ".
The personal destination memory is opened.
3. Select the destination you want.
4. Select " Start route guidance " to start the route
guidance.

Displaying the location of a destination

1. Press the f button.
2. Select " Stored destinations ".
The personal destination memory is opened.
3. Select the destination you want.
4. Select " Details ".
The location of the chosen destination is
shown in the map view. To find out more,
please refer to the section "Map display" on
page 166.
5. Select " Start route guidance " to start the route
guidance if needed.

Editing the address of a destination

1. Press the f button.
2. Select " Stored destinations ".
The personal destination memory is opened.
3. Select the destination you want.
4. Select " Edit "
> " Address ".
The address entry menu is opened.
5. Make the changes you want.
6. Select " Accept ".
7. The old data is overwritten.

Adding destinations


Traces cannot be added with this menu item.
1. Press the f button.
2. Select " Stored destinations ".
The personal destination memory is opened.
3. Select " Add destinations
".
Adding addresses by address entry
Enter address
4. Select " ".
5. If applicable, select " Country " and select the
country you want in the list.
6. Select the " Town/postal code Street/no.
" and "
menu items one after the other and enter the
appropriate details in the input menu.
7. Select " Store
" to store the entered address for
the entry.
Adding destinations by loading from a USB
4. Select " Load from USB ".
The data is transferred.

You can only access the " Load from USB
transmission mode if there is a USB memory
stick attached to the USB interface. To find
out more about the permissible USB memory
media, please refer to the section "Notes on
the media supported" on page 43.
NAVI
"
"
147