Table of Contents
Advertisement
Deleting all trips
5. Select "
All trips
".
6. Confirm by selecting "
Yes
".
All trips are deleted.
Transferring the logbook data
Depending on how your PCM is equipped, you can
transfer stored data via either the Bluetooth
terface or the USB interface. The data is not delet-
ed during this process.
We recommend that you transfer and back up
the data at regular intervals.
The name of the file where the transferred log-
book data is stored is made up of the abbre-
viation "
FB
", the date (YYMMDD) and the ex-
tension ".bin".
Please note that multiple logbooks trans-
ferred on the same day will overwrite each
other without notice.
1. Press the w button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
Logbook
"
> "
Transfer data
".
124
CAR
Transferring data via the USB interface
You can only access the "
To USB
sion mode if there is a USB memory stick at-
tached to the USB interface. To find out more
about the permissible USB memory media,
please refer to the section "Notes on the me-
dia supported" on page 43.
4. Select "
To USB
".
The data is transferred, provided there is a
®
in-
storage medium without write protection and
with sufficient free memory connected.
Otherwise you are notified of the problem with
the data transfer by means of an error mes-
sage.
Transferring data via the Bluetooth interface
Please note that the connection between both
devices must be activated for data transfer
®
using Bluetooth
. To find out how to activate
this connection, please refer to the section
®
"Switching Bluetooth
on" on page 125.
5. Select "
To Bluetooth
".
6. A list of all known devices that may be used for
a transfer of logbook data is displayed. If the
" transmis-
device you want is not there, you can search
for further devices. To do this, press "
vice
" (see also the section "Adding a new Blue-
®
tooth
device" on page 125).
As soon as the search is complete, a list con-
taining the devices found is displayed.
7. Select the device you want in the list.
The data is transferred.
You may first need to authorise a new device.
To find out more, please refer to the section
"Adding a new Bluetooth
page 125.
®
Bluetooth
settings
®
Calling up Bluetooth
1. Press the w button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
Logbook
"
> "
Transfer data
"
Bluetooth settings
> "
New de-
®
device" on
settings
".
Advertisement
Chapters
Table of Contents
