Editing Data From The Current Trip - Porsche PCM3.1 Operating Manual

1. Press the w button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select " SET CAR
"
> " SET logbook "
> " Standard trip ".
4. Select the trip type you want.

Editing data from the current trip

You can change the different pieces of data regis-
tered by the logbook during recording of a trip as
many times as you want during the trip.
Changing the trip type
1. Press the w button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select " Logbook
"
Current trip
> " ".
4. Select the trip type you want.
Changing the driver
1. Press the w button.
2. Press the i button or touch the tab of
the same name in the header.
120
CAR
3. Select " Logbook
"
> " Current trip "
> " Edit trip "
Driver
> " ".
A list of all the drivers created so far is
opened.
If a driver has been assigned a specific
key, this is also shown in the list.
4. Insert the driver you want by selecting him or
her.
Creating a new driver
1. Press the w button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select " Logbook "
Current trip
> " "
> " Edit trip "
> " Driver "
New driver
" ".
The input menu is opened.
4. Enter the name of the new driver and confirm
by selecting " OK ".
 If the current trip is not a Business trip
rather a Work trip or Private trip , the only
Driver
fields available to you are " " and "
marks ".
Changing the trip destination
1. Press the w button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select " Logbook
"
> " Current trip "
> " Edit trip "
> " Trip destination ".
A list of all the destinations created so
far is opened.
4. Insert the trip destination you want by select-
ing it.
Creating a new trip destination
1. Press the w button.
2. Press the i button or touch the tab of
the same name in the header.
Logbook
3. Select " "
> " Current trip "
> " Edit trip "
Trip destination
> " "
> " New trip destination
The input menu is opened.
4. Enter the new trip destination you want and
, but
OK
confirm by selecting " ".
Re-
".