Porsche PCM3.1 Operating Manual page 180

- or -
û Activate voice control.
Beep
"Station number 1".
"Station number 1".
The PCM tunes to the corresponding station.
Tuning to stored AM stations
You can say the memory location of a stored sta-
tion from the AM main menu.
û Activate voice control.
Beep
"Station number 1".
"Station number 1".
The PCM tunes to the corresponding station.
Entering a frequency
You can also tune to FM and AM stations by enter-
ing the frequency. The frequency input menu only
accepts frequencies within the given waveband:
– FM waveband: 87.5 - 108.0 MHz,
with 0.5 MHz increments.
– AM waveband: 531 kHz - 1620 kHz,
with 1 kHz increments.
180
Voice control
Example for entering the frequency 98.4 MHz in
the FM waveband:
û Activate voice control.
Beep
"Manual tune".
"Manual tune".
The display switches to the frequency input
menu.
"Please say the desired frequency".
Beep
"Ninety-eight point four".
"Frequency Ninety-eight point four megahertz".
The PCM tunes to the corresponding frequen-
cy; the frequency input menu stays open.
 With the command "frequency" directly fol-
lowed by the MHz frequency you want, you
can enter a frequency without the display
changing to the frequency input menu.
Station search
You can use the commands "next station" and
"previous station" to start the station search in the
FM or AM waveband. The search scans upwards
or downwards and automatically stops at the next
receivable station.
Automatic station search (autostore)
The automatic station search fills the memory of
the preset memory currently selected with the six
stations with the strongest reception signal at the
present time.
Any stations that have already been stored
(e.g. manually stored) are overwritten.
This function is not available for preset memories
BEST FM and MIXED.
Example for entering an autostore in the preset
memory FM1:
û Activate voice control.
Beep
"Autostore FM1".
"Autostore FM1".
The PCM starts the function.
Starting/stopping the scan function
If you activate this function, each station found
within the frequency range will be played for ap-
prox. 5 seconds.
û Activate voice control.
Beep
"Start scan".