Tracing A Route - Porsche PCM3.1 Operating Manual

Setting the grid for automatic setting of the
navigation points
You can set the intervals at which the so-called
trace points are set during trace recording:
– " Optimised "
The navigation system automatically gener-
ates a navigation point at geometrically practi-
cal locations in order to record the trace.
The number of navigation points set by the sys-
tem depends on the frequency of the changes
in direction.
Set ... mls
– " "
Here you define at what point in the driven
route a navigation point is to be set during
trace recording. The navigation points are set
regardless of any changes in direction.
Up to 1,000 trace points per trace are set during
recording. The setting chosen when setting the
points determines the maximum route that can be
recorded.
The memory remaining for the active recording is
displayed in the map.
1. When off-road navigation is switched on, press
the f button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select " SET NAVI "
> " Off-road "
> " Off-road settings ".
Recording mode
4. Select " ".
5. Set the grid you want by selecting it.
Setting trace points manually
You can also set trace points manually during
trace recording.
1. Press the f button while trace recording
is underway.
2. Press the i button or touch the tab of
the same name in the header.
3. Select " SET NAVI "
Off-road
> " "
> " Set trace point ".

Tracing a route

You have various options when tracing routes,
based on the trace direction (" Trace forward
" Trace backward ") and trace point (" From start
point From current position
" and " "):
– From start point, trace forwards:
You are directed to the start point of the re-
cording and drive the trace from the start point
to the end point.
– From start point, trace backwards:
You are directed to the end point of the record-
ing and drive the trace from the end point to
the start point.
– From current position, trace forwards:
You are directed to the closest point in the
trace and drive the trace in the direction of the
end point.
– From current position, trace backwards:
You are directed to the closest point in the
trace and drive the trace in the direction of the
start point.
After starting navigation, you are navigated to the
next navigation point. Route guidance is by means
of a compass display with the vehicle symbol in
the centre of the compass rose.
NAVI
" and
163