External Bluetooth; Audio Source; Source/Starting Playback; Activating The Interface - Porsche PCM3.1 Operating Manual

 SET DISC
You will only be able to access the "
/ AUX " menu if there is at least one audio
source from the DISC area available.
1. Press the n button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select " SET DISC / AUX "
> " Volume adaptation "
Volume AUX
> " ".
4. Make the setting you want by selecting the
symbols and or by turning
q
right rotary knob.
48
DISC
®

External Bluetooth

audio source

You can also connect an external audio source
that is partially operated on the source itself rath-
er than on the PCM via a Bluetooth

For the connection and operation of the exter-
®
nal Bluetooth audio source, the PCM also
supports the A2DP/AVRCP profile.
The extent to which the external Bluetooth
audio source can be operated on the PCM de-
the
pends on the functions supported by the au-
dio source. Operation of the external Blue-
®
tooth audio source on the PCM is therefore
restricted in some cases. In other cases, op-
eration on the PCM is not possible. The audio
source is then operated on the connected de-
vice itself. Please refer to the operating man-
ual for the relevant device.
WARNING!
Accident hazard. Distraction could result in
you losing control of the vehicle.
û Operate the external audio source only
when you are safely in control of your vehi-
cle and traffic conditions permit. If in doubt,
stop the vehicle and operate the external
audio source while the vehicle is parked.
Calling up an external Bluetooth

source/starting playback

û Press the n button repeatedly until the
" AUX BT " audio source is highlighted in the bot-
®
connection.
tom line.
Playback starts automatically if this is support-
ed by the Bluetooth
sary to start playback manually on the Blue-
®
®
tooth device.

The " AUX BT " mode is only displayed if a cor-
responding device is connected to the inter-
face.

Activating the interface

To use an external Bluetooth
AUX Bluetooth function must be activated in the
" SET DISC / AUX " menu.
1. Press the n button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select " SET DISC / AUX
You will only be able to access the "
AUX " menu if there is at least one CD/DVD in-
serted or at least one audio source activated
( ) in the menu.
4. Select " AUX Bluetooth
deactivate ( ) the function.
When you deactivate "
®
Bluetooth devices are deleted from the list if
necessary.
®
audio
®
device. It may be neces-
®
audio source, the
".
SET DISC /
" to activate ( ) or
AUX Bluetooth
", the