Table of Contents
Advertisement
Basic voice control functions
Activating voice control
You cannot activate the voice control system while
you are on a telephone call.
1. Switch on the ignition and the PCM.
2. Press the button on the stalk for the direction
indicators, high beam and headlight flasher.
An audible signal sounds after a short time, the
voice control system is activated and awaits a
spoken command. If you do not say a com-
mand, the voice control system prompts you
to speak with the request, "Could you repeat
that?".
As soon as the voice control system is activated,
you will see one of the following symbols at the top
right of the display:
–
= The voice control system is awaiting
a spoken command.
–
= The voice control system is currently
making an announcement.
Deactivating voice control
You can deactivate the voice control system as fol-
lows:
û Press the button on the stalk for the direction
indicators, high beam and headlight flasher.
- or -
û Say "cancel" or "end" when the voice control
system is expecting a command.
After the system is deactivated, you will hear a
confirmation announcement of "End", after which
the voice control system switches off.
Setting the volume
You can change the volume of the voice control
system announcements to compensate for chang-
es in the ambient noise during the journey, for ex-
ample.
1. Activate the voice control system and say a
command such as "help".
2. Turn the volume control on your device during
an announcement to raise or lower the volume
of the announcement.
The volume of the voice control system an-
nouncements is independent of that of the tel-
ephone and audio system.
Setting the language
The voice control system recognises various lan-
guages. When you change the language, it affects
voice input by the user, voice output by the PCM
and the language shown on the display.
Voice control
175
Advertisement
Chapters
Table of Contents
