Configuring The Voice Control System - Porsche PCM3.1 Operating Manual

Selecting the language yourself
1. Press the w button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select " SET PCM system
"
> " PCM language ".
4. Select the language you want.
Adapting the language to the instrument
cluster
1. Press the w button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select " SET PCM system
"
PCM language
> " ".
4. Select " Automatic ".
The language of the instrument cluster is set.
 If the language of the instrument cluster is not
available as a language in the PCM, the lan-
guage "English GB" is set.
176
Voice control

Configuring the voice control system

You can configure how you interact with the voice
control system in just a few steps.
1. Press the w button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select " SET PCM system "
> " Voice control ".
The following options are then available for you
to select:
Repeat
– " "
The voice control system repeats all recog-
nised commands. You can switch off this
repetition. Switching it off makes using the
voice control system faster but this comes
at the expense of not knowing whether the
voice control system has correctly recog-
nised the command given.
Voice entries and digits are always repeated,
even if the function is switched off.
– " Quick dialog "
If you activate this function, the PCM outputs
certain announcements in an abridged form.
This does not change the information con-
tent of the announcements. This option is
useful for experienced users.
– " Show hints "
This function is switched on at the factory. If
it is switched on and voice control is activat-
ed, the PCM shows you commands that are
available in addition to the menu items al-
ready shown.
4. Select to activate ( ) or deactivate ( ) the re-
spective function.