Operating Examples; Operating Example For Radio Mode - Porsche PCM3.1 Operating Manual

Operating examples

The voice control system is designed so that you
can say each menu item shown on the display. If
you activate the "Show hints" function, exceptions
are indicated by an appropriate message on the
display of the PCM.
The PCM also shows you the most relevant com-
mands possible at that time as soon as you are
prompted to enter a command. To find out more,
please refer to the section "Configuring the voice
control system" on page 176.
Due to the large number of control options, we
have chosen to provide a number of operating ex-
amples on the following pages instead of a full list-
ing of all voice-controlled functions.

Operating example for radio mode

Calling up radio mode and switching
waveband
û Activate voice control.
Beep
"Tuner".
"Tuner".
The PCM switches to radio mode if another
mode was active prior to the command being
entered. If radio mode was already active, the
waveband is switched.
Selecting the preset memory
You can select a preset memory directly. Do this
by saying the command "preset memory FM 1",
for example.
Tuning to a currently receivable FM station
If you know the currently receivable FM stations
and if radio mode is your active audio source, you
can tune to the station you want by saying its
name.
û Activate voice control.
Beep
"Station BBC Radio 3".
"Station KCRW".
The PCM tunes to the corresponding station.
Tuning to stored FM stations
You can either say the name of a stored station
from the FM main menu or the number of the cor-
responding memory location.
û Activate voice control.
Beep
"Station BBC Radio 3".
"Station KCRW".
Voice control
179