Table of Contents
Advertisement
Deactivating ParkAssist
ParkAssist can be deactivated using the
in the roof control console. The indicator light in
the button is lit when ParkAssist is deactivated. In
this case there is no automatic display on the
PCM. Manual activation of the display is not possi-
ble either. To find out more, please refer also to
the section "Switching the display on manually" on
page 115.
û Press the
A
button to deactivate or reactivate
ParkAssist.
Switching the ParkAssist display on/off
Switching the automatic display on/off
If the function is activated, the visual parking aid is
shown on the PCM under the following conditions:
– when reverse gear is engaged,
– if a roll backwards is detected,
– if the distance at the front is less than 80 cm.
1. Press the w button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
SET CAR
"
> "
SET parking
".
4. Select "
ParkAssist
" to activate ( ) or
deactivate ( ) the function.
A
button
Switching the display on manually
1. Press the w button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
ParkAssist
".
The visual parking aid is shown on the PCM dis-
play.
When the display is active, you can switch im-
mediately to the "
SET parking
" menu by press-
ing the i button.
Closing the ParkAssist display
The display is closed again as soon as you:
– disengage reverse gear (after 30 seconds or a
speed of > 15 km/h (approx. 9.5 mph)),
– operate the electric parking brake,
– move the Porsche Doppelkupplung (PDK) gear
selector into the P position,
– press one of the main menu buttons or
– press the Back button h.
In the two last cases you can press the w
button to return to the display.
CAR
115
Advertisement
Chapters
Table of Contents
