Establishing A Connection From An External Bluetooth; Device - Porsche PCM3.1 Operating Manual

1. Press the c button.
2. Select " Find telephone ".
A search is started and a list of the devices
found is displayed.
3. Select the device you want in the list.
®
A Bluetooth code is displayed, which you
must enter on your mobile phone.
®
4. Enter the displayed Bluetooth code on the
mobile phone.
Successful authorisation of the device is
shown on the display and the connection is es-
tablished.

With some mobile phones, the connection re-
quest by the PCM must be explicitly confirmed
on the mobile phone. This may even have to
be done a number of times in some cases,
for example before transferring the phone-
book. To avoid this request, you can authorise
the PCM in your mobile phone's list of devic-
es. The connection will then be established
automatically in the future, without the need
for further checks.
Further details can be found in the operating
manual for your mobile phone.
To find out more, please refer also to the sections
®
"Authorised Bluetooth devices" on page 95 and
®
"Adding a new Bluetooth device" on page 97.
Establishing a connection from an
®
external Bluetooth

device

If the PCM does not find your mobile phone or a
connection attempt by the PCM fails, you can also
start the authorisation from the mobile phone.
1. If another mobile phone is connected with the
®
PCM, switch off Bluetooth on the connected
mobile phone to disconnect the connection
with the PCM.
2. Press the c button.
3. Press the i button or touch the tab of
the same name in the header.
The PCM is now visible for external devices.
®
 Please ensure that the Bluetooth visibility of
the PCM is activated. To find out more, please
refer to the section "Setting visibility" on
page 69.
4. Using the mobile phone, search for audio ac-
cessories or devices that support Bluetooth
Refer to the manufacturer's operating instruc-
tions to find out how to do this.
5. Select the device "PCM" from the mobile
phone's search results and establish a connec-
tion.
Refer to the manufacturer's operating instruc-
tions to find out how to do this.
6. A request appears on the PCM display.
Select " Accept ".
7. A keypad appears where you enter a four-digit
®
Bluetooth code of your choice and confirm
with " OK ".
PHONE
®
.
57