Entering An Address For A New Route Guidance Session From The List; Displaying The Location Of A Destination; Editing The Address Of A Destination; Deleting - Porsche PCM3.1 Operating Manual

Entering an address for a new route
guidance session from the list
1. Press the f button.
2. Select " Previous destinations ".
The list of previous destinations is opened.
3. Select the destination you want.
4. Select " Start route guidance " to start the route
guidance.

Displaying the location of a destination

1. Press the f button.
Previous destinations
2. Select " ".
The list of previous destinations is opened.
3. Select the destination you want.
4. Select " Details
".
The location of the chosen destination is
shown in the map view. To find out more,
please refer to the section "Map display" on
page 166.
5. Select " Start route guidance " to start the route
guidance if needed.

Editing the address of a destination

1. Press the f button.
2. Select " Previous destinations ".
The list of previous destinations is opened.
3. Select the destination you want.
Edit
4. Select " "
> " Address ".
The address entry menu is opened.
5. Make the changes you want.

Deleting

1. Press the f button.
2. Select " Previous destinations ".
The list of previous destinations is opened.
3. Select the destination you want.
4. Select " Edit "
> " Delete ".
Deleting a destination from the list
5. Confirm the prompt that appears by selecting
" Yes ".
The chosen destination is deleted from the list.
Deleting the entire list
5. Select " Delete list "
Delete all
> " ".
The entire list is deleted.
Storing a destination in the personal
destination memory
Storing of destinations in the list of previous desti-
nations takes place automatically. If all the memo-
ry locations are full, the PCM automatically deletes
the oldest entry from the list.
If you want to keep a destination permanently
available, you can store it in your personal destina-
tion memory under a name of your choice.
1. Press the f button.
2. Select " Previous destinations ".
The list of previous destinations is opened.
3. Select the destination you want.
4. Select " Store ".
The input menu is opened.
5. Enter the destination name you want and con-
firm by selecting " OK ".
The destination is stored in the personal desti-
nation memory.
NAVI
145