Destination Input Using Geographical Coordinates; Destination Input Using The Map; Storing; Storing A Destination - Porsche PCM3.1 Operating Manual

Destination input using
geographical coordinates
If you know the geographical coordinates for a
destination, you can use them for destination in-
put.
1. Press the f button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select " Adv. destination input
"
> " Geo. co-ordinates ".
An input menu is opened.
4. Enter the geographical coordinates you want
and confirm by selecting " OK ".
5. Select " Start route guidance ".
The route is calculated and route guidance
started.
158
NAVI

Destination input using the map

You can use the map view for destination input as
an alternative to entering an address.
1. Press the f button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select " Adv. destination input "
Destination via map
> " ".
The map view is displayed.
4. Set the destination you want by touching the
map.
5. Open the detailed view by pressing the right ro-
tary knob u or touching the " Details
in the header.
6. Select " Start route guidance
".
7. The route is calculated and route guidance
started.

Storing

This menu item allows you to store both a destina-
tion and your current position.

You can also access this function in the
i menu in the map view.

Storing a destination

If route guidance is currently active, you can store
either the destination or the entire route depend-
ing on the type of route guidance in your personal
destination memory. The menu item provided here
is tailored to the respective situation.
The following options are available:
– " Store destination "
is displayed during route guidance to an ad-
dress, a geographical coordinate or a point of
interest.
Store tour
– " "
is displayed during route guidance to a stopo-
ver or to the main destination in a tour.
" menu
Store landmarks
– " "
is displayed when off-road navigation is active
when tracing a landmark navigation session.