Call Waiting (Swapping) And Conference - Porsche PCM3.1 Operating Manual

Entering a new telephone number
1. Press the left selection button under the "Op-
tions" menu item.
2. Select the "New call" menu item using the
rocker button.
3. Press the left selection button under the "Se-
lection" menu item.
4. Enter the individual digits in the telephone
number one after the other using the keypad.
5. Press the left selection button under the "Call"
menu item.
Calling an entry from one of the lists
1. Press the left selection button under the "Op-
tions" menu item.
2. Select the "New call" menu item using the
rocker button.
3. Press the left selection button under the "Se-
lection" menu item.
4. Select the list you want using the rocker but-
ton.
5. Press the left selection button under the "Se-
lection" menu item.
6. Select the list item you want using the rocker
button.
7. Press the left selection button under the "Op-
tions" menu item.
8. Select "Call" using the rocker button.
9. Press the left selection button under the "Se-
lection" menu item.
The active call is retained if the second connection
is established.
You can switch between the two calls or hold a
conference call.

Call waiting (swapping) and conference

The call waiting (swapping) and conference func-
tions are only available if supported and unlocked
by the network provider.
Call waiting (swapping)
While you are on a call, you may receive a call from
someone else.
1. Press the left selection button under the "Ac-
cept." menu item if you would like to accept
the incoming call.
2. Press the right selection button under the
"Swap" menu item to swap between the two
calls.
PHONE
103