Cancelling A Detour; Setting A Fast/Quick Route; Setting Dynamic Route Planning (Tmc) - Porsche PCM3.1 Operating Manual

Making a detour around route sections
The list of route sections shows the individual sec-
tions of the calculated route. The section you are
currently driving on when you call up the list ap-
pears at the top of the list.
1. Press the f button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select " Route options "
> " Detour "
Route sections
> " ".
The list of route sections is displayed.
4. Select the route section you want.
A list containing the parts of this route section
is displayed.
5. Select the parts to activate ( ) or
deactivate ( ) them.
6. Press the Back button h or the f
button to activate the detour.
7. The detour is then set. This is indicated by the
Route sections
symbol in front of the "
menu item.
154
NAVI

Cancelling a detour

Detour off
Selecting " " cancels all previously set
detours.
The symbol is no longer displayed and a new
route is calculated.
1. Press the f button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select " Route options "
> " Detour "
Detour off
> " ".
All blocks are cancelled.

Setting a fast/quick route

These two route options allow you to influence
how the route is calculated.
You can set or change the route options before
the route is calculated or during route guidance.
1. Press the f button.
"
2. Press the i button or touch the tab of
the same name in the header.
3. Select " Route options
".
4. Activate or deactivate the route option you
want by selecting it.
– Short route
Calculates the shortest route to the destina-
tion.
– Quick route
Calculates the fastest route to the destina-
tion.

Setting dynamic route planning (TMC)

If you have activated dynamic route planning, the
traffic messages broadcast by the radio stations
are taken into consideration when calculating the
route.
To find out more about traffic messages, please
refer to the section "Displaying traffic messages
(TMC)" on page 109.
1. Press the f button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select " Route options ".
4. Select " Dynamic reroute " to activate ( )
or deactivate ( ) the function.