Porsche PCM3.1 Operating Manual page 170

WARNING!
Accident hazard. The navigation system is
only intended as an aid to the driver. This does
not release you from your full responsibility for
observing road safety, traffic conditions, legal
road traffic regulations and any other relevant
regulations while driving your vehicle.
Road signs en-route should always be heeded.
The speed limit displayed by the PCM may not
always be correct.
As the driver, you must assess the particular
speed limit. You have sole responsibility for
road safety while driving your car.
û Continue to heed road signs en-route.
– " Show traffic "
When this function is activated, the traffic mes-
sages are displayed in the map view.
– " Guidance "
When this function is activated, driving instruc-
tions are displayed in the form of arrow sym-
bols.
– " Footer (station/track) "
When this function is activated, the footer is
also shown in the map view.
170
Map display
Map menu
– " "
When this function is activated, a symbol is dis-
played in the map view that gives you access
to all of the functions of the map menu.
North arrow
– " "
When this function is activated, a north arrow
is displayed.
– " North orientation "
When this function is activated, the map will be
Bird's-eye view
oriented to the north. If the "
option is active, the " North orientation
has no function.
– " Day/night switchover "
The following options are available for you to
select:
Automatic
– " "
The map view automatically switches from
day design to night design as a function of
the vehicle lighting.
– " Day "
The map view always remains set to the day
design colours. This means the display col-
ours are optimised for legibility.
– " Night "
The map view always remains set to the
night design colours. The display colours are
dimmed to prevent glare.
Display arrival time
– " "
You can choose whether the estimated "
time " or the " Remaining time
played in the map view.
4. Select the various list items to show ( ) or
hide ( ) them in the map view.
The map view is adapted in accordance with
your settings.
"
Compiling the points of interest to be
" option
displayed
1. Press the g button.
2. Press the i button or touch the tab of
the same name in the header.
SET MAP
3. Select " "
> " Show POIs ".
The list containing the various point of inter-
est categories is displayed.
4. Select the point of interest category you want.
The list containing the associated subcatego-
ries is displayed.
5. Select the various subcategories to show ( )
or hide ( ) them in the map view.
The map view is adapted in accordance with
your settings.
Arrival
" is to be dis-