Table of Contents
Advertisement
Resetting trip data
Pressing the
button field for at least 1 sec-
ond resets the trip data for the "
Total trip data
and "
Trip data since ...
" display groups.
1. Press the w button.
2. Set the display to be reset by selecting the
symbols
and
.
3. Select
for at least 1 second.
The trip data in the corresponding display is re-
set.
114
CAR
ParkAssist
ParkAssist indicates the distance between the ve-
"
hicle and an object visually and acoustically for the
driver when parking and manoeuvring.
The visual parking aid of ParkAssist is shown on
the PCM display. Obstacles located in front of and
behind the vehicle are indicated using different col-
oured fields. These fields show the contour of ob-
stacles as well as their distance from the vehicle.
ParkAssist is activated automatically when the
ignition is turned on up to a speed of approx.
15 km/h (approx. 9.5 mph).
To find out more, please refer also to the cor-
responding chapter in the owner's manual.
WARNING!
Accident hazard. Even with ParkAssist, re-
sponsibility for parking and for assessing ob-
stacles lies with the driver.
A continuous tone sounds when there is a risk
of collision.
û Make sure that there are no people, ani-
mals or obstacles within the manoeuvring
area.
û If the continuous tone sounds, do not move
the vehicle any closer to an obstacle.
The following coloured fields are used to show ob-
stacles and their distance from the vehicle:
Distance in front
Distance behind
Field colour
of the vehicle
the vehicle
green
< 120 cm
< 180 cm
yellow
< 80 cm
< 80 cm
red
< 40 cm
< 45 cm
red with
continuous
< 30 cm
< 35 cm
tone
If ParkAssist detects a trailer, no distance in-
formation is displayed for the rear of the vehi-
cle.
Advertisement
Chapters
Table of Contents
