Table of Contents
Advertisement
ASX-112FR Autosampler Operator's Manual
Chapter 3: Installing the Autosampler
Assemble and Place the Sample Rack and Vials
Never attempt to load, unload or reposition the sample vial rack or sample
WARNING
vials while the autosampler is operating. The sample probe may move
unexpectedly and cause an injury.
Figure 3-11. ASX-112FR Autosampler Rotary Tray
The ASX-112FR features a rotary tray, shown in Figure 3-11, which holds both
standards and samples. A variety of sample racks can be placed within the
center cavity of the rotary tray. Sample racks are classified as short or tall,
allowing the ASX-112FR to be configured in either a short or tall configuration.
Standards vials also vary between the short and tall configurations. For the
short configuration, standard positions 1 through 5 hold 20 mL vials and
standard positions 6 through 14 hold 4 mL vials. For the tall configuration,
standard positions 1 through 5 hold 30 mL vials and standard positions 6
through 14 hold 10 mL vials.
Short Rack Configuration
Figure 3-12. CETAC Sample Racks – Short Rack.
32
Advertisement
Table of Contents
