Spare Parts; Peristaltic Pump Tubing; Sample Probes; C-Flow Pfa Nebulizers For The Aridus Ii And Asx-112Fr - Teledyne CETAC ASX-112FR Operator's Manual

ASX-112FR Autosampler Operator's Manual
Chapter 6: Maintaining the Autosampler

Spare Parts

Spare parts may be obtained by contacting CETAC or your authorized CETAC
distributor. Part numbers are subject to change; visit www.cetac.com for a
complete list of currently available spare parts.

Peristaltic Pump Tubing

Part Number
SP6089
SP6190
SP7296
Sample probes include an encapsulated carbon fiber support.

Sample Probes

Part Number
SP6328
SP6397
SP6329
C-Flow PFA Nebulizers for the Aridus II/Aridus3 and
Nebulizers are constructed of PFA and feature a built-in sample probe with a
ASX-112FR
polyimide support.
Part Number
SP8204
SP8204A
SP8204B
When you purchase sample and/or standards vials, make sure they meet the

Vials

following requirements:
 The diameter of the sample or standards vial matches the rack size you are
using.
 The vials are not too tall.
 The material is compatible with the samples or reference standards.
Always use the correct vials. Use of mismatched sample vials may result in
CAUTION
malfunctions or sample spills. See page 8 for supported vial sizes.
62
Description
Replacement standard-size peristaltic pump tubing (PharMed®)
Smaller-diameter tubing for lower solution flow rates (PharMed®)
Small diameter (0.8 mm) tubing for lower solution flow rates
(Tygon®)
Description
0.3 mm ID probe
0.5 mm ID probe
0.9 mm ID probe
Description
C-Flow nebulizer with 50 µL/min uptake
C-Flow nebulizer with 100 µL/min uptake
C-Flow nebulizer with 200 µL/min uptake