ASX-112FR Autosampler Operator's Manual
Chapter 8: Operating a CETAC Autosampler Using a Terminal Program
Figure 8-1 Starting C-Term
Once C-Term is loaded, the window shown in Figure 8-2 will open. The
Overview of the C-Term Window
majority of C-Term's functions are available from this window.
Figure 8-2 C-Term Window
By default, typed commands are sent to the CETAC device connected to the
opened port. The typed commands will appear in light green in the terminal
buffer. Responses from the device will appear in red. Non-printing characters
such as carriage returns will appear as ASCII hexadecimal numbers
surrounded by square brackets, for example, [0D] is the carriage return
character.
70