Teledyne CETAC ASX-112FR Operator's Manual page 13

 IEEE-488 Interface Kit. The kit includes an RS-232/IEEE-488 converter
box, an IEEE-488 cable, a power cord, and instructions. It is used to convert
an IEEE communications protocol to a serial protocol.
 C-Flow PFA Nebulizer. The C-Flow Nebulizer is a molded, fixed-capillary
style PFA concentric nebulizer for the introduction of low-volume (< 1mL)
samples to an ICP-MS. The inert PFA construction allows the introduction
of all acids (including hydrofluoric acid), alkalis and organic solvents. It
features a standard 6mm diameter tip for easy installation to most spray
chambers.
 QuickWash Fast Washout Accessory. The QuickWash Fast Washout
Accessory can be used with the Aridus II™ or Aridus3 Desolvating
Nebulizer System and the ASX-112FR Autosampler. The ASX-112FR can
trigger the QuickWash to begin a rinse cycle for the nebulizer's PFA spray
chamber.
 Alternate Rinse Height Kit. Alternate rinse kits are available as spares to
convert a short configuration into a tall and vice versa.
 Alternate Sample Rack Kits. Additional rack kits are available as spares to
run samples of varying volumes.
 Sample Probes. A variety of sample probes are available as spares. Probes
are available with internal diameters of 0.25 mm, 0.50 mm, and 0.89 mm.
NOTE:
Contact Teledyne CETAC Technologies if you need additional accessories not
listed, need added features to integrate the autosampler into your analytical
system, or have unique requirements. Research and development of new
features and accessories for the autosampler, often inspired by customer
requests, is a continuing activity at Teledyne CETAC Technologies.
ASX-112FR Autosamplers Operator's Manual
Chapter 1: Introduction
13