Table of Contents
Advertisement
ASX-112FR Autosamplers Operator's Manual
Chapter 5: Using the Autosampler
Double-click "ASX-11x Pump Speed – 1.0.0.
3
Figure 5-2. Running the Pump Speed Application (CD Contents May Vary).
A shortcut icon will appear that can be used to easily access the pump speed
control
Figure 5-3. Desktop Shortcut for Pump Speed Application.
The pump speed control screen is shown below, with description for each of
Changing the Pump Speed
the controls. Actual rinse solution liquid flow will depend on the inner
diameter of the pump tubing and the pump speed setting. For lowest flows (4
to 5 mL per channel), use the smaller ID pump tubing (SP6190 for PharMed
tubing, SP7296 for PVC) and set the pump speed at 1% of scale.
Figure 5-4. Pump Speed Tool
Refresh Ports – Refreshes the COM port list
Connect/Disconnect – Connects/disconnects the COM port
Slider – Sets the desired speed in percent
Set Speed – Writes the speed to the device
Pump On – Turns the pump on
Pump Off – Turns the pump off
Info [i] – Displays the "about" box
53
Advertisement
Table of Contents
