ASX-112FR Autosampler Operator's Manual
Chapter 5: Using the Autosampler
Reconfiguring the Autosampler ICP-MS Personality
The ASX-112FR autosampler is configured at the CETAC factory with a
"personality" which enables it to follow the commands issued by the
customer's particular model of ICP-MS instrument. If the autosampler is to be
used with a different model ICP-MS, the autosampler personality must be
changed. Please contact CETAC at CETACservice@teledyne.com for
instructions.
Changing the Peristaltic Pump Speed
A software control tool is available to control the speed of the back-panel
mounted peristaltic pump (if the ASX-112FR is so equipped).
This software is located on the CD disc included with the ASX-112FR.
Installing the Pump Speed Tool
Insert the CD disc into the host computer and a list of files will appear.
1
Open the "ASX-110FR & ASX-112FR Information" folder.
2
Figure 5-1. Location of Pump Speed Tool On CD (CD Contents May Vary).
52