Table of Contents
Advertisement
ASX-112FR Autosampler Operator's Manual
Chapter 3: Installing the Autosampler
If the C-Flow PFA nebulizer is to be used, secure the uptake line of the
nebulizer near the top of the built-in probe.
5
Loosen the thumbscrew of the tubing holder block on the front left of the
autosampler.
6
Carefully slide the probe tubing into the holder block groove and gently tighten
the thumbscrew. The end of the probe tubing comes out of the triangular slot
7
in the lower left corner of the transparent cover.
Attach the end of the standard probe to the nebulizer. If using the C-Flow PFA
nebulizer, insert the end of the C-Flow into the PFA spray chamber. See Figure
8
3-3 for Aridus II or for Figure 3-4 Aridus3.
Figure 3-3. Connection of C-Flow PFA Nebulizer to Aridus II.
22
Advertisement
Table of Contents
