Table of Contents
Advertisement
ASX-112FR Autosampler Operator's Manual
Chapter 9: Safety and Regulatory Information
For additional cleaning information, see "cleaning" in the index.
Cleaning Instructions
To clean the exterior surfaces of the instrument, complete the following steps:
Shut down and unplug the instrument.
1
Wipe the instrument exterior surfaces only using a towel dampened with a
lab-grade cleaning agent.
2
Repeat step 2, using a towel dampened with clear water.
3
Dry the instrument exterior using a dry towel.
4
SHOCK HAZARD
WARNING
Do not allow any liquid to enter the instrument cabinet other than as
intended through the specified tubing, or come into contact with any
electrical components. The instrument must be thoroughly dry before you
reconnect power, or turn the instrument on.
If you insert any part of your body between the moving parts of the
Mechanical Hazards
autosampler, you could be injured.
PINCH HAZARD
WARNING
Keep fingers, hair, and loose clothing away from the moving parts of the
autosampler.
FRICTION HAZARD
Keep hands away from the probe while the autosampler is operating.
80
Advertisement
Table of Contents
