Ikegami HDL-45E Operation Manual page 16

3ccd multiple-purpose hdtv camera
Table of Contents

Advertisement

1 - 2
2. FEATURES
■ HD-SDI Output
Two HD-SDI outputs are provided from the camera. Menu and characters can be set to ON or OFF for each output
independently. If characters are set to OFF for the output used for the main line and ON for the output for
monitoring, menu can be operated during a take.
■ BBS (Black Burst Sync) External Synchronization
External synchronization can be performed for VBS and BBS of SDTV in addition to PS and 3-value Sync of
HDTV.
■ HD and VD External Synchronization (Optionally Available)
HD and VD external synchronization can be optionally supported. Operation as machine vision with high sensitivity
and high picture quality is possible.
(For HD and VD synchronization, one HD-SDI output is available.)
* For HD and VD synchronization timing, contact our sales representative.
■ Remote Control
All controls required for operations and for setting up the camera can be performed with the RCP-50B control panel
and so on. (Maximum cable length of RCP-50B: 200m)
In addition, ISCP commands (so-called U4 commands) can be supported by switching the camera menu. Controls
required for operations can be performed from an external remote control panel such as a camera platform control.
* For placing in a small camera platform housing such as U4-SP, Up CN box (optionally available) which moves
upward needs to be installed to prevent the connector plug from sticking out to the rear side.
■ Multi Format
Corresponding to the following formats.
HDL-45E: 1080/59.94i, 1080/50i, 1080/29.97psF, 1080/25psF
HDL-45E1: 1080/59.94i, 1080/50i, 1080/29.97psF, 1080/25psF, 1080/24psF, 1080/23.98psF
■ Digital Extender
The screen center can be expanded by the digital process. The expansion magnifications up to 10 times can be
selected. When the zoom function and the digital extender are applied together, the object can be more expanded.
■ Frame Accumulation
Shooting in the dark part is possible by raising sensitivity by the frame accumulation. Sensitivity can be improved
with the low noise, without increasing the amount of the noise like the gain increase.
■ Sensitivity Improvement of Pixel Addition
Sensitivity can be improved with reducing deterioration of S/N by digitally adding the signals of adjacent horizontal
2 pixels and vertical 2 pixels.
■ AVC (Auto Video-level Control)
The appropriate image level can be automatically operated at all times by automatically controlling the ND filter
and gain control.
■ ATW (Auto Tracking White Balance)
R and B gains can be automatically adjusted and the white balance can be automatically corrected.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hdl-45e1

Table of Contents