Ikegami HDL-45E Operation Manual page 39

[MENU PAGE3]
1. "MENU PAGE3" contains eight items: "LOW/MID/HIGH GAIN MODE," "SHUTTER," "LENS SELECT," "DIGITAL
EXTENDER," "PIX ADD SELECT," "H REVERSE," "AVC SETUP," and "ATW SETUP."
2. To select the desired item, turn and press the MENU select switch while the item is blinking. The sub menu screen of the
selected item is displayed.
3. If the MENU select switch is pressed while "EXIT" is blinking, the menu will turn off.
＊＊＊ MENU PAGE3 ＊＊＊
NEXT PAGE
LOW/MID/HIGH GAIN MODE
SHUTTER
LENS SELECT
DIGITAL EXTENDER
PIX ADD SELECT
H REVERSE
AVC SETUP
ATW SETUP
EXIT
LOW/MID/HIGH GAIN MODE : Sets the "L" "M" and "H" values for the GAIN select switch
SHUTTER
LENS SELECT
DIGITAL EXTENDER
PIX ADD SELECT
H REVERSE
Sets the delay by the horizontal reverse with the
AVC SETUP
ATW SETUP
OFF/DELAY/REVERSE
OFF
ON/OFF
ON
ON/OFF
ON
on the back of the camera.
: Selects SHUTTER or changes the value.
: Selects lens file.
: Sets the magnification of the digital extender.
: Sets the gain for starting the horizontal pixel addition or
the vertical pixel addition.
: Sets the horizontal reverse of the display.
operation of the 3D camera using the half mirror.
OFF : Standard mode.
DELAY : Performs the delay of image
corresponding to the REVERSE.
REVERSE : Performs the horizontal reverse. At this
time, the delay of image occurs.
: Switches over ON/OFF of the AVC function.
: Switches over ON/OFF of the ATW function.
5. OPERATION 5 - 11