Ikegami HDL-45E Operation Manual page 60

5 - 32 5. OPERATION
■ INFORMATION
DIP SWITCH
WORKING TIME
SUB TIME
STR NO
CHECK SUM
V EFFECT
[SWITCH]
Displays the switch settings for the MPU module of the CCU in the following sub menu screen. Pressing the MENU switch
while this screen is being displayed moves to the "INFORMATION" screen.
[WORKING TIME]
Displays accumulated operation time since the shipment.
[SUB TIME]
Displays the accumulated operation time of the camera. Unlike "WORKING TIME," this can be reset by a user.
1. Select "SUB TIME" and press the MENU switch. The blinking cursor moves to the mode.
2. Select "RESET" and press the MENU switch. The operation time is reset to "0.0H."
INFORMATION
SWITCH
WORKING TIME 123.4H
SUB TIME 12.3H
STR NO STR-5529V00.00.00
CHECK SUM (4A09)
VEFFECT STR-5290V03
COPYRIGHT(C)2011
IKEGAMI TSUSHINKI CO. LTD.
: Displays the setting state of the dip switches in the MPU module.
: Displays accumulated operation time of the camera up to now.
: Displays accumulated operation time of the camera.
: Displays the ROM version in the MPU module.
: Displays the checksum of the ROM data.
: Displays the ROM version of the FPGA in the V EFFECT module
of the CCU.
In changing the ROM version, verify that the checksum separately
informed and the one displayed on the menu screen match.
MPU MODULE
(SW1) RESET SW
1-OFF OFF
2-OFF
3-OFF
4-OFF
5-OFF
6-OFF
7-OFF
8-OFF