Table of Contents
Advertisement
5 - 12
5. OPERATION
■ LOW/MID/HIGH GAIN MODE
■ SHUTTER
・To select each SHUTTER or change the value, "SHUT MODE" is set to the corresponding item in
advance.
1/15, 1/10, 1/8, 1/6, 1/5, 1/4, 1/3, 1/2, 1s, 2s, and 4s are the CCD accumulation sensitivity
improvement mode. Sensitivity improves according to the accumulation time. But the residual
image also increases according to the accumulation time. The CCD accumulation sensitivity
improvement needs to be set with the movement of the object.
・When the MENU select switch is pressed on the item to be set, the value on the right blinks.
Keeping this state, turn the MENU select switch to select the desired value and press it.
CAUTION
LOW/MID/HIGH GAIN MODE
QUIT
LOW GAIN
0dB
MID GAIN
+36dB
HIGH GAIN
+48dB
SHUTTER
QUIT
SHUT MODE
OFF
1/100
PRESET SHUT
VAR SHUT
1/63.4
SLOW SHUT LIMIT
4S
The variable range of the variable shutter changes according to the
format.
When the MENU select switch is
pressed on the item to be set, the
value on the right blinks. Keeping this
state, turn the MENU select switch to
set the value (-6dB to +54dB).
However, set the values as "LOW
GAIN" < "MID GAIN" < "HIGH GAIN."
L: LOW GAIN
M: MID GAIN
H: HIGH GAIN
(OFF, PRESET, VAR)
(1/2000, 1/1000, 1/500, 1/250, 1/120,
1/100, 1/15, 1/10, 1/8, 1/6, 1/5, 1/4,
1/3, 1/2, 1s, 2s, 4s)
(1/63.4 to 1/1983)
Sets the limit to the slow shutter that can be
controlled from the remote controller.
(4s, 2s, 1s, 1/2, 1/3, 1/4, 1/5, 1/6,1/8, 1/10,
1/15, OFF)
Advertisement
Table of Contents
