Tripod Installation - Ikegami HDL-45E Operation Manual

4 - 2 4. INSTALLATION and CONNECTIONS
4.2

Tripod Installation

This section explains how to install the camera to the tripod.
There are two ways to install the camera: one is to install it directly to the tripod and the other is to use the dedicated tripod
mount plate (optionally available).
< Installation to a tripod directly >
Camera
*A tripod screw hole accepts 3/8 inch
for tripod installation.
1. Aligns the tripod screw hole on the camera with the camera attach screw on the tripod.
2. Tighten the camera attach screw until the camera is firmly secured to the tripod.
< Installation to the tripod mount plate (T-230) >
Tripod screw hole
(Use for either or both.)
*A tripod screw hole accepts 3/8 inch or
1/4 inch for tripod installation.
Tripod screw hole
Camera attach screw
Camera
V Wedge
adaptor
Tripod mounting screw
T - 230
Bottom side
Tripod
Bottom side
Lock lever
Tripod