Table of Contents
Advertisement
• START UP TIME
Sets the time taken from the change of the subject's color to moving to the process that actually
matches the color. OFF performs correction for the change at once. The time before starting
correction is long when the value is high. Please set the speed of reaction toward the subject's
change.
• START CC FILTER
Sets the CC filter at ATW ON.
① When [C.TEMP SETTING RED] is selected, the menu is displayed as shown below.
Changes the R ch side correction range of [PRESET] in [ATW MODE].
QUIT
RED LIMIT AUTO SET
RED LIMIT CONTROL
RED LIMIT INIT
・RED LIMIT AUTO SET
1. Sets ATW MODE to PRESET, and shoots the red subject for matching.
2. Sets [RED LIMIT AUTO SET] to ON, and executes [PUSH SET START].
3. When COMPLETE is displayed, the color temperature (Red) of ATW allowed is
changed within the range of color temperature of the subject.
・RED LIMIT CONTROL
Enables the fine adjustment of the ATW allowable range.
By + direction, enables to broaden the ATW allowable range of the color whose color
temperature is low (Red).
By - direction, enables to narrow the ATW allowable range of the color whose color
temperature is low (Red).
・RED LIMIT INIT
Setting ON makes the ATW allowable range of the color whose PRESET color
temperature is low (Red) to be set back to the factory setup.
C．TEMP SETTING RED
ON
0
OFF
PUSH SET → START
5. OPERATION
(ON, OFF)
(-100 to +100)
(ON, OFF)
5 - 43
Advertisement
Table of Contents
