Table of Contents
Advertisement
● About AUTO SEL NAME EDIT display
QUIT
AUTO SEL NAME EDIT
(AB40X10ABCD
NOW CONNECTED LENS
(AB40X10ABCD
QUIT
AUTO SEL NAME EDIT
(AB40X10A＊＊＊
NOW CONNECTED LENS
(AB40X10ABCD
9. Press "SET" and finish the edit.
The edit mode ends, and blinking of ( ) at both ends
stops.
Notice
• Processing when AUTO READ is executed is as follows.
[The serial lens is being connected.]
AUTO SEL NAME becomes the model name of the serial lens being connected
now.
[The lens is not connected; The analog lens is being connected.]
Maintains the registered AUTO SEL NAME.
• AUTO SEL NAME EDIT can be set regardless of the connected lens type (including
the time of disconnecting).
AUTO SEL NAME EDIT is a function to edit the model name read by AUTO
READ.
It doesn't function when the model name of the serial lens being the target in
AUTO READ is not obtained.
AUTO SEL NAME EDIT
)
)
AUTO SEL NAME EDIT
)
)
5. OPERATION
Display part of the lens name to edit
Displays the model name of the lens to edit.
Display part of the lens name to connect
Displays the model name of the lens
being connected now.
7. Selects the lens name to edit and
press "SET."
Switches to the edit mode, and ( ) at
both ends blinks.
8. Edits AUTO SEL NAME.
Input "*" after the letters exempt from
the comparison target at AUTO SEL.
In the example of the left figure,
"AB40X10A" is the comparison target
and "BCD" is not the comparison
target.
The same lens file can be applied to
the following two lenses.
"AB40X10ABCD"
"AB40X10AACD"
5 - 17
Advertisement
Table of Contents
