Table of Contents
Advertisement
5 - 28
5. OPERATION
[FRAME MARKER]
Sets the display mode of the frame marker.
• OFF
• ON-16:9
• ON-14:9
• ON-13:9
• ON-4:3
[SAFETY AREA]
Sets the type of the safety marker.
• ACTION
• TITLE
[SAFETY MARKER]
Sets the display mode of the safety marker.
• OFF
• ON-16:9
• ON-4:3
[CENTER MARKER]
Sets the display mode of the center marker.
• OFF
• ON
[ZEBRA IND]
Sets the display mode of the zebra marker.
• OFF
• ON
[ZEBRA SETTING]
Sets the zebra signals.
The zebra signals are striped patterns that appear superimposed on the video. There are two types of zebra signals: the zebra 1
signal which appears in the area where the video level of the subject is higher than the set value for "ZEBRA1 DETECT," and
the zebra 2 signal which appears only in the area where the video level is the same as the set value for "ZEBRA2 DETECT."
The striped patterns to be generated for the zebra 1 signal and zebra 2 signal are different. For the zebra 1 signal, thin and
diagonal striped patterns run in the upper right direction of the screen. For the zebra 2 signal, thick and diagonal striped patterns
slightly and slowly run in the lower right direction of the screen.
The zebra 1 signal is used to manage tones for the overall screen. The zebra 2 signal is used to mange partial tones of subjects
associated with memory colors such as face tones.
: Does not display the frame marker.
: Displays the 16:9-size frame marker.
: Displays the 14:9-size frame marker.
: Displays the 13:9-size frame marker.
: Displays the 4:3-size frame marker.
: Displays the safety marker for the ACTION area (90%).
: Displays the safety marker for the TITLE area (80%).
: Does not display the safety marker.
: Displays the 16:9-size safety marker.
: Displays the 4:3-size safety marker.
: Does not display the center marker.
: Displays the center marker.
: Does not display the zebra marker.
: Displays the zebra marker.
ZEBRA SETTING
QUIT
ZEBRA1 DETECT
ZEBRA2 IND
ZEBRA2 DETECT
ZEBRA1 DETECT : Sets the signal level to display the ZEBRA1 indicator.
ZEBRA2 IND
: ON: Displays the ZEBRA2 indicator.
OFF: Does not display the ZEBRA2 indicator.
ZEBRA2 DETECT : Sets the signal level to display the ZEBRA2 indicator.
(30% to 109%)
100%
(OFF, ON)
OFF
(30% to 109%)
70%
Advertisement
Table of Contents
