Ikegami HDL-45E Operation Manual page 66

5 - 38 5. OPERATION
● HDL-45E1
SUB MENU
MAIN MENU
NEXT PAGE -
SCAN FORMAT SELECT QUIT
SCAN MODE
DATA COPY QUIT
COPY FILE
SOURCE FORMAT
WRITE FORMAT
COPY
SCAN FORMAT ENABLE QUIT
REMOTE CONTROL
1080I59.
1080I50
1080P23.SF
1080P24SF
1080P25SF
1080P29.SF
EXIT -
****** ENGINEER PAGE4 ******
SELECT DEFAULT
- - Moves to MENU PAGE1.
- - Moves from the sub menu to the main menu.
1080I59., 1080I59. Selects the output format setting.
1080I50, Only the format set to [ENABLE] on the SCAN FORMAT ENABLE can
be selected.
1080P23.SF,
1080P24SF, 1080I59. : 1080/59.94i
1080P25SF, 1080I50 : 1080/50i
1080P23.SF : 1080/23.98psF
1080P29.SF
1080P24SF : 1080/24psF
1080P25SF : 1080/25psF
1080P29.SF : 1080/29.97psF
- - Moves from the sub menu to the main menu.
ALL, CONTROL ALL Selects the setting of copy of data.
DATA, SCENE, To prevent the wrong operation, it cannot be operated from the remote
LENS, controller. It can be operated only from the menu switch on the rear of
AWB Ach/Bch, the camera.
AWB/ABB REF,
ON/OFF
1080I59., 1080I59. Selects the format of copy source.
1080I50, To prevent the wrong operation, it cannot be operated from the remote
1080P23.SF, controller. It can be operated only from the menu switch on the rear of
the camera.
1080P24SF,
1080P25SF,
1080P29.SF
1080I59., 1080I50 Selects the format of copy destination.
1080I50, To prevent the wrong operation, it cannot be operated from the remote
controller. It can be operated only from the menu switch on the rear of
1080P23.SF,
1080P24SF, the camera.
1080P25SF,
1080P29.SF
READY, READY Copies the selected data. Starts the copy when selecting the EXECUTE.
CANCEL, To prevent the wrong operation, it cannot be operated from the remote
EXECUTE controller. It can be operated only from the menu switch on the rear of
the camera.
- - Moves from the sub menu to the main menu.
ENABLE, DISABLE ENABLE ENABLE : Enables the scanning format from the remote controller.
DISABLE : Disables the scanning format from the remote controller.
ENABLE, DISABLE ENABLE Selects whether the format change is enabled or disabled from the
SCAN FORMAT SELECT.
To prevent the wrong operation, it cannot be operated from the remote
ENABLE, DISABLE ENABLE
controller. It can be operated only from the menu switch on the rear of
ENABLE, DISABLE ENABLE the camera.
ENABLE, DISABLE ENABLE
ENABLE, DISABLE ENABLE
ENABLE, DISABLE ENABLE
- - Turns off the menu.
FUNCTION