Ikegami HDL-45E Operation Manual page 65

CAUTION
● HDL-45E
MAIN MENU SUB MENU
NEXT PAGE -
SCAN FORMAT QUIT
SELECT
SCAN MODE
DATA COPY QUIT
COPY FILE
SOURCE
FORMAT
WRITE FORMAT
COPY
SCAN FORMAT ENABLE QUIT
REMOTE
CONTROL
1080I59.
1080I50
1080P29.SF
1080P25SF
EXIT -
As for ENGINEER PAGE4, formats are different between HDL-45E
and HDL-45E1.
****** ENGINEER PAGE4 ******
SELECT DEFAULT
- -
- -
1080I59., 1080I59.
1080I50,
1080P25SF,
1080P29.SF
- -
ALL, CONTROL ALL
DATA,SCENE,
LENS, AWB
Ach/Bch,
AWB/ABB REF,
ON/OFF
1080I59., 1080I59.
1080I50,
1080P25SF,
1080P29.SF
1080I59., 1080I50
1080I50,
1080P25SF,
1080P29.SF
READY, READY
CANCEL,
EXECUTE
- -
ENABLE, DISABLE ENABLE
ENABLE, DISABLE ENABLE
ENABLE, DISABLE ENABLE
ENABLE, DISABLE ENABLE
ENABLE, DISABLE ENABLE
- -
5. OPERATION
FUNCTION
Moves to MENU PAGE1.
Moves from the sub menu to the main menu.
Selects the output format setting.
Only the format set to [ENABLE] on the SCAN FORMAT ENABLE can
be selected.
1080I59. : 1080/59.94i
1080I50 : 1080/50i
1080P25SF : 1080/25psF
1080P29.SF : 1080/29.97psF
Moves from the sub menu to the main menu.
Selects the setting of copy of data.
To prevent the wrong operation, it cannot be operated from the remote
controller. It can be operated only from the menu switch on the rear of
the camera.
Selects the format of copy source.
To prevent the wrong operation, it cannot be operated from the remote
controller. It can be operated only from the menu switch on the rear of
the camera.
Selects the format of copy destination.
To prevent the wrong operation, it cannot be operated from the remote
controller. It can be operated only from the menu switch on the rear of
the camera.
Copies the selected data. Starts the copy when selecting the EXECUTE.
To prevent the wrong operation, it cannot be operated from the remote
controller. It can be operated only from the menu switch on the rear of
the camera.
Moves from the sub menu to the main menu.
ENABLE : Enables the scanning format from the remote controller.
DISABLE : Disables the scanning format from the remote controller.
Selects whether the format change is enabled or disabled from the
SCAN FORMAT SELECT.
To prevent the wrong operation, it cannot be operated from the remote
controller. It can be operated only from the menu switch on the rear of
the camera.
Turns off the menu.
5 - 37