Ikegami HDL-45E Operation Manual page 47

x1.5 GAIN ; Sets the DTL gain at the X1.5 magnification.
FREQ ; Sets the boost frequency at the FREQ; X1.5.
x2.0 GAIN ; Sets the DTL gain at the X2.0 magnification.
FREQ ; Sets the boost frequency at the FREQ; X2.0.
x3.0 GAIN ; Sets the DTL gain at the X3.0 magnification.
FREQ ; Sets the boost frequency at the FREQ; X3.0.
x4.0 GAIN ; Sets the DTL gain at the X4.0 magnification.
FREQ ; Sets the boost frequency at the FREQ; X4.0.
x6.0 GAIN ; Sets the DTL gain at the X6.0 magnification.
FREQ ; Sets the boost frequency at the FREQ; X6.0.
x8.0 GAIN ; Sets the DTL gain at the X8.0 magnification.
FREQ ; Sets the boost frequency at the FREQ; X8.0.
x10.0 GAIN ; Sets the DTL gain at the X10.0 magnification.
FREQ ; Sets the boost frequency at the FREQ; X10.0.
LOAD INIT ; Turning it on makes the system to be set back to the default value.
Notice
When LOAD INIT is turned on, GAIN and FREQ of each magnification return to the
preset default value.
■ PIX ADD SELECT
Sets the horizontal pixel addition and vertical pixel addition.
QUIT
H ADD SELECT
V ADD SELECT
H ADD SELECT
Sets the gain for starting the horizontal pixel addition. The horizontal pixel addition is executed when the gain
increase becomes over the setting. The sensitivity improvement that suppresses the deterioration of S/N can
be executed by the horizontal pixel addition.
However, the horizontal resolution decreases. The horizontal pixel addition is not executed at turning off.
V ADD SELECT
Sets the gain for starting the vertical pixel addition. The vertical pixel addition is executed when the gain
increase becomes over the setting. The sensitivity improvement that suppresses the deterioration of S/N can
be executed by the vertical pixel addition.
However, the vertical resolution and the dynamic resolution decrease. The vertical pixel addition is not
executed at turning off.
Notice
The vertical pixel addition and the electronic shutter (the CCD accumulation sensitivity
improvement is included) cannot be used together. Priority is given to the electronic
shutter when it is turned on, and the vertical pixel addition stops. It doesn't work for
the 1080psF format.
PIX ADD SELECT
+18dB
+18dB
5. OPERATION
(+12/+18/+24/+30/+36/+42/+48/+54dB /OFF)
(+12/+18/+24/+30/+36/+42/+48/+54dB /OFF)
5 - 19