Ikegami HDL-45E Operation Manual page 32

5 - 4 5. OPERATION
[MENU PAGE1]
1. "MENU PAGE1" contains eight items: "STEP GAIN," "GAMMA SELECT," "BLK PRS/STR," "FILTER SELECT,"
"CAL," "FAN CTRL," "MONITOR OUT," and "AUTO BLK SEL."
2. To select the desired item, turn and press the MENU select switch while the item is blinking.
3. When "STEP GAIN," "GAMMA SELECT," "BLK PRS/STR," "CAL," "FAN CTRL," "MONITOR OUT," or "AUTO
BLK SEL" is selected, the blinking cursor moves to the mode at the right of the selected item. Turn the MENU select switch
to set it to the value to be set and press it while the mode is blinking.
4. When "FILTER SELECT" is selected, the sub menu screen is displayed.
5. If the MENU select switch is pressed while "EXIT" is blinking, the menu will turn off.
＊＊＊ MENU PAGE1 ＊＊＊
NEXT PAGE
STEP GAIN
GAMMA SELECT
BLK PRS/STR
FILTER SELECT
CAL
FAN CTRL
MONITOR OUT
AUTO BLK SEL
EXIT
STEP GAIN
GAMMA SELECT : Switches gamma type (NORMAL, CINE1, CINE2) and step (0.45,
BLK PRS/STR
FILTER SELECT : Switches over ND and CC respectively.
CAL
FAN CTRL
MONITOR OUT
AUTO BLK SEL
■ GAMMA SELECT
1. "GAMMA SELECT" contains two items: "MODE," and "STEP." To select the desired item, turn and press the MENU
switch while the item is blinking.
2. The blinking cursor moves to the mode at the selected item. Turn the MENU switch to set it to the value to be set and press
it while the mode is blinking.
3. To return to the menu screen of "MENU PAGE1," select "QUIT" and press the MENU switch while "QUIT" is blinking.
0 dB
0.45 (NORMAL)
OFF
OFF
LOW
G/B/R
ABB
: Switches over gain.
0.40, 0.35, OFF).
: Switches the level of BLK PRS/STR.
: Turns CAL on/off.
: Switches over the FAN speed on the rear side of the camera.
: Switches over video output signal.
: Selects "ABB" or "ABS" when ABB is performed.
(-6, -3, 0, +3, +6, +9, +12, +18, +24, +30, +36, +42,
+48, +54)
(0.45, 0.4, 0.35, OFF)(NORMAL, CINE1, CINE2)
(-11%, -9%, -7%, -5%, -3%, OFF, +3%, +5%, +7%,
+9%, +11%)
(ON, OFF)
(HI, LOW)
(G/B/R, Y/PB/PR)
(ABB, ABS)