USB Port
USB Port LED
You can use the USB port on the management panel for the following
functions:
Store configuration files on flash drives.
Restore configuration files to switches whose settings have been
lost or corrupted.
Configure replacement units by downloading configuration files
from a flash drive.
Update the AlliedWare Plus management software.
The port is USB2.0 compatible.
The USB port has one LED, shown in Figure 9.
The states of the LEDs are described in Table 2.
State
Off
Solid green
Flashing green
Flashing amber
USB Port
Figure 9. USB Port and LED
Table 7. USB LED
The USB slot is empty.
A USB drive is inserted in the slot.
The switch is writing data to or reading
data from the USB drive.
The switch is experiencing problems
writing data to or reading data from the
USB drive.
GS980M Series Installation Guide
USB Port LED
Description
33