Global Configuration
Enable/Disable
LLDP
Perform the following procedures to configure the Global parameters for
LLDP:
"Enable/Disable LLDP"
"System Information" on page 260
"Port States" on page 261
To enable or disable the LLDP feature, perform the following procedure:
1. From the main menu on the left side of the page, click the LLDP folder.
The LLDP folder expands.
2. From the LLDP folder, select LLDP Global Settings.
The AT-GS950/8 LLDP Global Settings Page is displayed.
See Figure 93.
Figure 93. AT-GS950/8 LLDP Global Settings Page
AT-GS950/8 Web Interface User Guide
259