Vehicle Door Lock Operated During Driving - Geely EC718 2009 Workshop Manual

11-354 Central Locking
No
Step 3 Carry out the Central Lock active test.
Yes
Confirm the vehicle speed signal.
Step 4
Yes
Check the BCM circuit.
Step 5
No
Replace the BCM.
Step 6
Next
System normal.
Step 7

11.9.7.9 Vehicle Door Lock Operated During Driving

Schematic:
Refer to 11.9.7.4 Mechanical Key / Central Locking Switch Can Not Lock All
EC718/EC718RV EC715/EC715RV 10/2009
(a) Use scan tool to clear DTC.
Is the system working correctly?
System normal
Yes
(a) Use scan tool to carry out the Central Locking active locking
function.
Is the Central Locking working?
Refer to
No
Locking Switch Can Not Lock All Doors
(a) Connect scan tool to the ABS system, read data when the
actual vehicle speed reaches 20 km/h or above.
Is the speed signal data more than 20 km/h?
Check the data communications network.
No
check the ABS system, the vehicle speed
sensor and the ECM circuit.
(a) Check the BCM power supply, ground and data
communication circuits.
(b) Repair the BCM-related circuits.
Is the system working properly?
System normal
Yes
(a) Replace the BCM. Refer to
Confirm the repair completed.
Doors.
Body Electric
11.9.7.4 Mechanical Key / Central
11.10.8.1 BCM Replacement.