Front Door Outside Handle Replacement - Geely EC718 2009 Workshop Manual

Body, Sheet Metal and Painting
Installation Procedure:
1. Install and tighten the front check link retaining bolts (M6).
Torque: 10 Nm (Metric) 7.4 lb-ft (US English)
2. Tighten the retaining bolt (M8).
Torque: 25 Nm (Metric) 18.5 lb-ft (US English)
3. Install the front door trim panel.
12.5.2.3
Replacement
Removal Procedure:
1. Remove the front door trim panel. Refer to
Side Door Trim Panel
2. Remove the front door lock cylinder. Refer to
12.5.2.5 Front Door Lock Cylinder
3. Disconnect the front door outside handle rod.
4. Remove the front door outside handle.
Note
Do not discard the seal gasket.
FE12-0173b
5. Loosen the front door outside handle retaining blot.
6. Remove the inner part of the front door outside handle.
FE12-0174b
Front Door
Replacement.
EC718/EC718RV EC715/EC715RV 10/2009
Doors 12-41
Outside Handle
12.9.1.12 Front
Replacement.