12-92
Interior Trim
4
3
3
EC718/EC718RV EC715/EC715RV 10/2009
3
5
2
3
FE12-0075b
1
2
2
FE12-0076b
Installation Procedure:
1.
Connect the front side door trim panel lamp connector, the
front door window switch connector and the tweeter
connector.
2.
Press the front side door trim panel to secure the retaining
clips (2).
3.
Install the front side door trim panel retaining screws (3).
Torque: 3.5 Nm (Metric) 2.6 lb-ft (US English)
4.
Press the front side door trim panel corner ornament to
secure the corner ornament retaining clip (4).
Note
The replacement of the left and right front door trim
panels are similar.
12.9.1.13
Replacement
Removal Procedure:
Warning!
Refer to "Battery Disconnect Warning" in "Warnings and
Notices".
1.
Disconnect the battery negative cable. Refer to
2.11.8.1 Battery
2.
Remove the rear side door trim panel retaining screws (2).
3.
Detach the rear side door trim panel retaining clips (3),
disconnect the wiring harness connectors and remove the
rear side door trim panel.
2
Body, Sheet Metal and Painting
Rear
Side
Door
Disconnection.
Trim
Panel