Rear Compartment Lid Torsion Spring Replacement (Sedan) - Geely EC718 2009 Workshop Manual

12-16 Body Rear End
EC718/EC718RV EC715/EC715RV 10/2009
Installation Procedure:
1. Install the rear compartment lid to hinges and tighten the
retaining bolts.
Torque: 10 Nm (Metric) 7.4 lb-ft (US English)
2. Install the wiring harness clips onto the rear compartment
lid.
3. Connected the rear compartment lid latch and two license
plate lamp harness connectors.
4. Install the rear compartment lid inner panel trim.
5. Close the rear compartment lid.
6. Connect the battery negative cable.
12.3.3.2 Rear Compartment Lid Torsion Spring
Replacement (Sedan)
Removal Procedure:
1. Detach the rear compartment lid torsion spring form the
rear compartment lid torsion spring bracket (Left).
FE12-0119b
2. Detach the rear compartment lid torsion spring from the
rear compartment lid hinge (Left).
FE12-0120b
Body, Sheet Metal and Painting