12-24
Body Rear End
1
EC718/EC718RV EC715/EC715RV 10/2009
12.3.3.7 Fuel Tank Filler Door Replacement
Removal Procedure:
1.
Open the fuel filler cap.
2.
Remove the fixed fuel filler gasket.
3.
Disconnect the fuel filler cap release cable.
FE12-0137b
4.
Remove the fuel tank filler door to rear quarter panel
retaining torx screws.
Note
Hold the nuts from the back to remove the torx
screws, otherwise the nuts may fall.
5.
Remove the fuel filler cap.
Installation Procedure:
1.
Install the fuel filler cap and tighten the retaining torx
screws.
Torque: 10 Nm (Metric) 7.4 lb-ft (US English)
2.
Connect the fuel filler cap release cable.
3.
Install the fixed fuel filler gasket.
4.
Close the fuel filler cap.
Body, Sheet Metal and Painting