Rear Fog Lamp Replacement (Sedan); Body Electric - Geely EC718 2009 Workshop Manual

Body Electric

Installation Procedure:
1. Insert and tighten the new fog lamp bulb to the fog lamp
assembly.
Note
Avoid touching the bulb or letting the bulb to come
into contact with any moist. When the lamp is turned
on, the grease or moisture on the bulb may cause
the bulb explode. If the bulb contacts with grease or
moisture, clean the bulb with alcohol or an
appropriate cleaning agent and dry the bulb.
2. Tighten the fog lamp retaining bolts.
Torque: 5.5 Nm (Metric) 4 lb-ft (US English)
FE11-0241b
3. Connect the fog lamp wiring harness connector.
4. Install the engine bottom shield.
5. Connect the battery negative cable.
Note
Hatchback front fog lamp replacement is the same
as sedan.

11.4.8.8 Rear Fog Lamp Replacement (Sedan)

Removal Procedure
Warning!
Refer to "Battery Disconnect Warning" in "Warnings and
Notices".
1. Disconnect the battery negative cable. Refer to
2.11.8.1 Battery
2. Remove the rear bumper. Refer to
Replacement
FE11-0242b
Lighting System
Disconnection.
(Sedan).
EC718/EC718RV EC715/EC715RV 10/2009
11-125
12.4.3.3 Rear Bumper