Spray Paint On The Repaired Rigid Sheet Metal Surface Procedure - Geely EC718 2009 Workshop Manual

12-172 Paint/Coatings
EC718/EC718RV EC715/EC715RV 10/2009
16. Spray the paint interface 2-3 times with the blending
thinner or the diluted clear lacquer.
FE12-1067b
17. Dry the paint in the paint room 20-30 min.
Paint room temperature 70-80°C (158-176 ºF)
FE12-0068b
12.13.4.5 Spray Paint on the Repaired Rigid
Sheet Metal Surface Procedure
Spray paint on the repaired rigid sheet metal surface process
is similar to spray paint on the sheet metal surface. There are
only a few additional steps between grinding and spray paint
background as following:
1. Apply Putty.
2. Putty grinding.
3. Removing dust, de-greasing, cleaning.
4. Filling Scratch gray eyes filled.
5. Sanding the old paint surface.
6. Cleaning, de-greasing and covering adjacent areas.
For the painting process, please refer
Spray Paint
Body, Sheet Metal and Painting
to12.13.4.4 Rigid Surface
Process.