Table of Contents
Advertisement
11-170
Glasses / Windows / Mirrors
Power Window Control Module (Without
Express Down) Harness Connector SO24
1 2
3 4
5
6 7 8 9 10 11 12 13 14 15 16 17 18
19
20
21
22
23
24
25
No
Repair the window regulator control module and the ground open circuit.
Step 8
No
Replace the window regulator control module.
Step 9
Next
System normal.
Step 10
11.5.7.7 Left Front Window Regulator Inoperative (Without Window Express Down Function)
Schematic:
Refer to
11.5.7.6 All Electric Windows Inoperative (Without Window Express Down
Diagnostic Steps:
Check the left front window lift switch ground circuit.
Step 1
EC718/EC718RV EC715/EC715RV 10/2009
26
27
28
29
30
31
32
33
34
35
FE11-5404 b
(a)
Disconnect the window regulator control module harness
connector.
(b)
Test continuity between the window regulator control module
harness connector SO24 terminals No.9,10,27 and ground
with a multimeter.
Test Terminal
SO249-Body Ground
SO2410-Body Ground
SO2427-Body Ground
Is the resistance specified value?
Go to step 9
Yes
(a)
Repair the open circuit between the window regulator control
module harness connector SO24 terminals No.9,10,27 and
ground.
Is the window regulator working properly?
System normal
Yes
(a)
Replace the window regulator control module. Refer to
11.5.8.8 Window Regulator Module Replacement (If
equipped).
(b)
Confirm the repair completed.
Function).
Body Electric
Continuity
Less than 1 Ω
Less than 1 Ω
Less than 1 Ω
Advertisement
Chapters
Table of Contents
