Rocker Panel Molding Replacement - Geely EC718 2009 Workshop Manual

12-106 Exterior Trim
EC718/EC718RV EC715/EC715RV 10/2009
Installation Procedure:
1. Install the front wheelhouse liner front retaining screws
and clips.
2. Install the front wheelhouse liner rear retaining screws
and clips.
3. Tighten the retaining screws.
Torque: 10 Nm (Metric) 7.4 lb-ft (US English)
4. Install the front wheels.
Note
For rear wheelhouse liner replacement, please refer
to the front wheelhouse liner replacement.

12.10.1.9 Rocker Panel Molding Replacement

Removal Procedure:
1. lift and support the vehicle.
2. Remove the rocker panel molding front retaining screw.
FE12-0104b
3. Remove the rocker panel molding middle and rear
retaining screws.
4. Detach the rocker panel molding bottom retaining clips
and remove the rocker panel molding.
FE12-0105b
Body, Sheet Metal and Painting