Body Electric
11.5.8.9 Windshield Replacement
Removal Procedure
1.
Remove the wiper arms. Refer to
Replacement.
2.
Remove the air inlet
Replacement.
3.
Remove the left / right front A pillar garnish moldings.
Refer
Replacement.
4.
Remove
11.5.8.2 Inside Rearview Mirror
5.
Remove the seal around the windshield.
FE11-1801b
6.
Cut the windshield glass adhesive with a thin steel wire.
Note
Wrap both end of the fine steel wire around a wood
handle, operate by with two people to facilitate the
removal. Place a piece of plastic on the instrument
panel to protect the instrument panel.
FE11-1802b
7.
Remove windshield from the frame.
Note
It takes two people to complete this step.
FE11-1803b
Glasses / Windows / Mirrors
duct.12.10.1.3 Air Inlet Grille Panel
to
12.9.1.3 Windshield
the
inside
rearview
EC718/EC718RV EC715/EC715RV 10/2009
11-207
11.6.8.2 Wiper Arm
Garnish
Molding
mirror.
Refer
to
Replacement.