Body, Sheet Metal and Painting
Installation Procedure:
1.
Press the rocker panel molding to secure the bottom
retaining clips.
2.
Tighten the rocker panel molding retaining screws.
Torque: 12 Nm (Metric) 8.8 lb-ft (US English)
Note
Two technicians are needed for the rocker panel
molding replacement.
FE12-0106b
12.10.1.10
Replacement
Removal Procedure:
1.
Remove the door seals.
FE12-0214b
2.
Remove the door seal strips side and rear retaining clips
and remove the door seal strips.
FE12-0215b
Exterior Trim
Vehicle
Inner
EC718/EC718RV EC715/EC715RV 10/2009
12-107
Side
Seal